Most of the time your Hydroponic lights and light reflectors work great in your Hydroponic grow room, except…what happened to the plants on the corners and ends? The plants are getting taller, but are kind of leggy and the foliage isn’t as full.
And what if you have a 4×6 or 3×5 Hydroponics gardening area? One grow light is not enough for complete light coverage, and two grow lights create too much heat and expense. Depending on your particular space for indoor gardening, it is sometimes impossible to conform to the light coverage that Hydroponic lighting and light reflectors provide .
If you do not have complete light coverage over your entire plant canopy, with the proper light spectrum reaching the outer edges of your Hydroponics gardening area, overall plant growth will be affected.
How can you solve these problems? Put your Hydroponic lighting system on the move with a Light Rail Light Mover to reach every inch of your Hydroponics growing area.
- The grow light and reflector are hung on a track, powered by a motor which will move the Hydroponic lighting back and forth. The speed and time delay at each end of the track is adjustable for your specific Hydroponics plant requirements.
- The Hydroponic lighting system can be placed within 12″ of the plant canopy without burning the tips of the Hydroponics plants, since the Hydroponic lighting is moving constantly with the light mover system.
- Stationary Hydroponic lights always shine the same intensity in the same spot. Moving your grow lights will provide light from different directions onto the plant canopy meaning more light energy being processed by more foliage, promoting even growth.
- The Light Rail light mover increases the intensity of light coverage to more Hydroponics plants by 25% or more.
- As the system travels down the track, it delivers light from different angles, providing even lighting to every plant, including the corner and end Hydroponics plants
- A Light Rail 3.5 light mover can be installed with 6′, 9′ and 12′ length tracks. A 6′ and 9′ track works with one grow light and reflector, and the 12′ track can be used with two grow lights and reflectors, making a light mover system a very economical use of grow lights and electricity.
A Light Rail Light Mover System is easy to install, and comes in a 3.5 size for hobby Hydroponics gardeners, and 5.0 for commercial gardening or Hydroponics gardening areas of 8×8 and larger.
A Light Mover System is a valuable addition to most Hydroponics gardening areas to solve consistency problems with Hydroponic lighting.
Visit http://www.natureshydroponics.com/ for your Hydroponics equipment and systems. We offer Free Shipping on many items.
